Text

Text documents are an easy and straightforward way of sharing information as they can hold a large amount of data. They are also easily understandable without complex tools or programs. However, when it comes to data in text form, it can be challenging to use without processing. An unprepared user may struggle to interpret the data quickly, and even if they do find the necessary information, it could take a long time.

To work with text and text data, it is advisable to use additional tools. For literary text or program code, tools can improve readability by highlighting syntax, breaking it into blocks or sections, etc. For a set of data saved in text form, a specially designed tool can help decrypt and display the values in a convenient way, such as through graphs or mnemonics.

If a system generates data during operation, it is also convenient to save them in log files for subsequent analysis. Similarly, if the system measures something in real-time, the measurement results can be saved in text format to determine how the data has changed over time.

Text processing systems can also be used for HTML processing and generation. The source data of any web page is HTML code, and we can generate HTML pages on the fly, useful when creating web management interfaces, or use existing pages to display information as needed.

Text processing does not require large computing resources, and even simple microcontrollers can be used. For storing large logs or data sets, a separate storage will be necessary, but the requirements for it will be lower than for media content storage. Minicomputers like Raspberry Pi or full-fledged PCs have enough memory to store a significant amount of clock information and sufficient computing power to process it quickly.

Developers should have the ability to create and use tools for working with text information as it is a necessary minimum before embarking on more complex tasks.

Ultraviolet 3D Printer with table swinging

UV curing resin 3D printer with table rocking for better mixing and manual table lift control The part is printed from a liquid resin that hardens under the influence of ultraviolet light. Due to the fact that the thickness of the layers is quite small, after immersion the resin does not always reach the entire surface of the part. To avoid this, use the “Table Rocking” function in between exposures

Pulse generation system with configuration specified by the Gantt chart

Designed for testing mechanical systems (for example, the fuel system of a car) on a bench using emulation of signals that are normally generated by the on-board computer in operating mode. The serial on-board computer does not always allow you to vary the parameters in the required range. Therefore, this system is used, to which the sensor outputs and control of actuators (molds, valves, etc.) are connected.

Gyroscopic dynamics measurement system for vehicle

The passive system does not require a connection to the car's on-board computer, it is enough to install it rigidly inside the cabin. After turning on, the system begins to receive data on accelerations and turns in real-time, based on which it generates relative data on movement, turn, speed, and acceleration. Data is transferred to a PC via USB connection (COM-port emulation) and processed by a control application

Water pumping control system

The system for installation on a pipeline for liquids pumping and control of the transportation process. Includes fluid flow sensors, motor current sensor and control relay for online control of process parameters, logging, emergency automatic and manual control of pumping.